Tianfeng Mining Machinery Factory: set iron ore magnetic separation, sand field equipment, coal yard equipment in one of the professional manufacturers.

Maintenance of coal blending machine

Article source: Tianfeng mining machinery factory, Xingtang County, Hebei Province popularity: twelve Published on: August 23, 2021

First of all, in addition to the uninterrupted working state, we need to stop the machine regularly and open the observation door to observe the internal wear of the mobile coal blending machine, as well as the wear degree of the central feeding pipe, cone cap, impeller upper and lower flow channel lining plate, vortex chamber lining plate and wear-resistant block. If the wear is serious, we should apply to the manufacturer for replacement or repair in time, and replace the wear-resistant block at the same time,Ensure that the weight of wear-resistant block is moved and the quantity of coal blending machine is the same.If the impeller body is worn, it should be replaced or repaired in time.Secondly, the bearing at the upper end of the main bearing is the floating end, and the lower end is the fixed end. After assembly, it is normal to pull the pulley to rotate flexibly.Open the main bearing to clean the bearing every 2000 hours.According to the use and maintenance, the bearing should be replaced after 5000 hours of service.During the operation of the mobile coal blending machine, due to the high speed of the equipment, special attention should be paid to safety production, and relevant personnel should stay away from the equipment.


Menu